CycleGiant.com / HelmetSuperstore.com
TOLL FREE: (800) 260-4050
20902 Bake Pkwy, STE 106 - Lake Forest, CA 92630
Mon-Fri 8am to 5pm, Sat 9am to 3pm
You are here:
Member List
>> Member Reviews
Showing Results 1 - 20 of 20
Product Reviews by Member
 |
Rating:
Installed all the Baker deflectors, Top, Middle, Lower, and foot. All work excellent on cool days, and keep the water off in the rain. Never had any issues with them not staying where adjusted, suggest others tighten friction a little. I added an "L" bracket to these hand warmers and put on rectangular sloped blind spot mirrors behind the warmers. WOW! You have no blind spots anymore and they are protected by the wing. Pics available on request. Baker should see them and offer as an add on kit. Baker products are top in the industry with a customer support thats just as good. 
|
 |
Rating:
Installed all the Baker deflectors, Top, Middle, Lower, and foot. All work excellent on cool days, and keep the water off in the rain. Never had any issues with them not staying where adjusted, suggest others tighten friction a little. I added an "L" bracket to these hand warmers and put on rectangular sloped blind spot mirrors behind the warmers. WOW! You have no blind spots anymore and they are protected by the wing. Pics available on request. Baker should see them and offer as an add on kit. Baker products are top in the industry with a customer support thats just as good.
|
 |
Rating:
Installed all the Baker deflectors, Top, Middle, Lower, and foot. All work excellent on cool days, and keep the water off in the rain. Never had any issues with them not staying where adjusted, suggest others tighten friction a little. I added an "L" bracket to these hand warmers and put on rectangular sloped blind spot mirrors behind the warmers. WOW! You have no blind spots anymore and they are protected by the wing. Pics available on request. Baker should see them and offer as an add on kit. Baker products are top in the industry with a customer support thats just as good.
|
 |
Rating:
Installed all the Baker deflectors, Top, Middle, Lower, and foot. All work excellent on cool days, and keep the water off in the rain. Never had any issues with them not staying where adjusted, suggest others tighten friction a little. I added an "L" bracket to these hand warmers and put on rectangular sloped blind spot mirrors behind the warmers. WOW! You have no blind spots anymore and they are protected by the wing. Pics available on request. Baker should see them and offer as an add on kit. Baker products are top in the industry with a customer support thats just as good.
|
 |
Rating:
I hated the price until after I installed and used them, now it was the best investment to date! I wired so I control on and off, not high and low beams. I also dissambled the dash and mounted a LED light above the cruise on light, so now I can see when they are on or off. It do get flashed even in the daytime running them but I want others to see me, so aparently they work. I usually only dim when meeting cars at night and not during the day. Its a must have safety item especially during day busy traffic. Do not get scared with the price, they are worth every dollar!
|
 |
Rating:
Relitivly easy to install and works excellent with available top luggage bag. Do purchase star washers for install. True it is a little harder to wax and clean underneath, but for the look and shine it is worth a little extra effort. Much nicer then the plain pipe racks.
|
 |
Rating:
I tried to put off this purchase rationalizing I really could use my hiway pegs. BUT after a trip to the east coast and a hiking accident that broke my left foot there was no way to ride home 1600 miles without a heel toe shifter, so that was reason enough to splurge and get the floor board kit. I have never regretted it sense. The one comment that big feet wont fit is correct, but being a 11 1/2 myself it was an easy fix. Leave off the little front shift bullet and just step on the shift arm itself. Works great, easy to use and my big feet fit perfectly on the floor board. A common sense remady of a small flaw of otherwise perfectly designed product. PS They look great to!
|
 |
Rating:
Installed in Nolan Flip front helmet. Attachment clamp was a joke. I slid onto plastic edge and drilled two holes and put clamp bolts trough plastic helmet edge, worked perfect, will never fall off and looks excellent, Good quality speakers. I have seen on other helmets where plastic clamp would fail, I think this method of install will be permenant for life of helmet. Good product and company.
|
 |
Rating:
Perfect OEM looking item and a must have. Easy to install and wireing plug is right behind panel, red 3 pin plug. I love the red light, much like aircraft lighting red does not hinder night vision/ I also installed heated grips and they connected to back of volt gauge saving running wires to battery. With addition of PIAA lights, and grips and other accessories on this gauge tells true story of power output and useage in real time. A must have on any bike, but even more so when additional electrical accessories are added.
|
 |
Rating:
Beautify OEM looking product. Easy to install (yes even cutting the seat, follow instructions and it is a no brainer) The only item to make cross country trips tolerable! Plus so easy for riders to get on and off, unlike many of the other bar type back rests. This is the caddilac of back rests and is only fitting to be installed on a Gold Wing, much like Mastercard...Priceless!
|
 |
Rating:
What to say, Perfect. Rain fly keeps contents dry in the rain, easy on and off, looks good and holds a lot. Enough said!
|
 |
Rating:
A must have! Rode across country last summer and rain both ways. After all day in the rain I was dry (after I learned how to wear) Note you must put hood up on head to seal water from running down back. After putting on correctly then helmet no water issues at all. Great storage bag and minimal space required, dont leave home without one!
|
 |
Rating:
A nice dress up item that is also practical! A little hard to get holes drilled in right place but with care it worked out first time, just time consuming to make it right. After having it I always lift trunk by handle now not my luggage rack!
|
 |
Rating:
For the price you can not go wrong. I always carry the bike cover in there. Kind of fragile but with care it works perfect, for the price it is excellent.
|
 |
Rating:
Relitivly easy to install and make a great addition when riding without intercom helmets. Nice plug and play installation. Good value.
|
 |
Rating:
Excellent inexpensive throttle boss. Fit perfectly on my new heated grips. Installs in seconds and appears to hold solidly. For the price you can not go wrong!
|
 |
Rating:
Fit good and easy to install. Only issue was Honda OEM metal key ring us not reusable. Easy to find another universal key ring to connect remote to keys. But for the price it will keep the remote from damage when/if it gets droped and protects my beautiful wood grain dash from scratches. Cheap insurance! 
|
 |
Rating:
Excellent product, and very easy to install in less then 5 minutes. Made correctly to fit without modifying and will protect the underside.
|
 |
Rating:
Hey they are inexpensive but work. East to install, just put narrow end forward and make sure they are down low under the handlebars. Yes they move a little when turning bars but have to. Only when lock to lock is ther any real small gap, but in all normal ride zones they seal the gaping holes. I do upholstery work all the time and for the price you can not afford to try am make yourself, splurge, and purchase them premade, you will not regret it.
|
 |
Rating:
Just got done installing on 05 GW. I also connected to OEM factory Red 3 pin plug under right side storage compartment. I had already installed Honda OEM Volt Gauge to plug so connected to back of Volt Gauge. Beautiful factory looking install. Great product and easy to install. A+
|
Stay In The Know!
Get notified of exclusive sales, clearance items,new products, the latest blogs, and more! Find more ways to save - Join our mailing list!